To add a part to your cart, simply click on that part's "Add Item" link...
Please call us or e-mail us if you do not see the parts you want here,
as we probably have what you are searching for even if it is unlisted on our website, rare, or a late model vehicle.
"Best / Closest Match" Part Search Results...
NOTE: Please make sure you read the most important aspect of each part's description - IF your part in question has this displayed in its data below, called "Part Note:" - IF present (not all parts have this sub-note area) - it may contain important information about specifically which vehicles within a model line, that particular part will apply to.
European Car Part Shopping Tips: Tip #1: KO uses the ACTUAL Dealership Part #s (which you can search our website for using the search box at the top of the page)
KO then ADDS to the END of the Dealership part #, the Manufacturer Code from the AAIA as -xxx
- this tells you, CLEARLY, what "Brand" of that part # you are selecting.
Tip #2: "Left" is the Driver's Side, and "Right" is the Passenger's side, from the perspective of being seated in the driver's seat looking TOWARDS the road from inside the car.
Coolant / Antifreeze Additive - Driven CSP (12 oz. Bottle)
Volvo Part Note:
Adds corrosion resistance to coolants and straight water. Better "wetting" than traditional coolant additives. Improves engine cooling by improving surface wetting and lower surface tension. Stops the adverse effects of hard water. Protects against rust and corrosion inside the radiator, water pump and cylinder heads. Stabilizes hard water.
Coolant / Antifreeze Additive - MOTUL MoCool (500 ml Bottle)
Volvo Part Note:
Engines run cooler by 30 deg. F. Improves thermal exchange and engine cooling system efficiency. Cooling system optimal protection against corrosion. Recommended for magnesium, aluminum alloy cases, cast iron, copper, brass and bronze systems. Water pump protection, avoid cavitation. Anti-corrosion properties that remain while high temperature and ageing. Low corrosion inhibitors consumption. Seals, rubber pipes, and plastics parts friendly. May be mixed with distillated water for immediate use as a coolant. Mix with water at 5% (20:1). Do not use undiluted product. Can be mixed with most coolants that are monoethylene glycol based.