This is truly a Plug and Play ECU
upgrade for your BMW E53 X5 3.0 that
allows you to run your stock program
or the enhanced software, keeping
you on the good side of your BMW service
managers 'list' if you need to. Designed
and programmed by Jim Conforti, one
of the most recognized software tuners
of the BMW world. This software upgrade
is a perfect solution to the upgrade/warranty
woes.
Jim Conforti Performance Engine Software
represents the most cost-effective
approach to increasing engine performance.
It has been dyno-tested to provide
a safe increase in power by altering
fuel enrichment, cam timing and ignition
timing specifically for use with premium
gasoline. Jim Conforti OBD-II Performance
Engine Software also provides an increase
in the factory rev-limit allowing
for optimum shift points for maximum
acceleration. Not only do we re-map
part-throttle fuel and spark, we also
re-map other areas of chips other
tuners don't touch - such as acceleration
enrichment, transition fueling (how
the car responds to rapid change in
pedal, and VANOS control as needed
to optimize the vehicle for operation
on premium fuel. This new software
for the 3.0 engine is fully octane
adaptive. It takes advantage of premium
fuels from 91 AKI to 95 AKI and higher.
There is no need for separate octane
related variants with this software!
The Jim Conforti
Shark Injector inludes:
Takes advantage of Premium
Fuel
Top Speed Limiter Increased
No need for seperate octane
additives
This do-it-yourself engine software
programming tool changes programming
in about 5 minutes and is completely
reversible, meaning your dealership
with the best of intentions won't
accidentally remove your performance
software when uploading an update!