car image
Place an Order Menu Top
 
Check Out
Order By Phone
Request For Information
 
Place an Order Menu Bottom

lowest price guarantee


Part Number SHARK

 
Part #:

Your Price: $367.99
Shipping: *Ship Group Qualified Part - (Ship Group?)
Stock Status: Usually In Stock
Description: E46 M3, S54 M Coupe/Roadster Shark Injector OBD-II Performance Programmer - Option 1: rk Injector OBD-II Performance Programmer - Option 1: Applications: 2001 - 2006 M3, M Roadster/M Coupe (E46, Z3) 2001-06 E46 M3 Stock: 278.2 rear wheel Horsepower , 235.3 rear wheel Torque Sharked: 284.2 rear wheel Horsepower, 236.9 rear wheel Torque Peak Gain 6.0 rear wheel HP and 1.6 rear wheel Torque (Note: the max gain (biggest improvement) is 9 rear wheel HP between 7000 and 8000 rpm) Top Speed Limiter Removed Option 1 is for: 93 octane, rev limiter raised to 8100 RPM, standard Performance Software, SMG Conforti's Comment: "The most LEGITIMATE hp you can get from an M3 via "software only" - 9 rear wheel HP is about 11 HP at the crank."
Not Available
Find Similar
Part #:

Your Price: $369.00
Shipping: $0.00 - FREE Shipping! - & *Ship Group
Stock Status: Out of Stock - E-mail me when available
Description: BMW part - Conforti Shark Injector for E39 525i/530i, E46 325/330, Z3 2.5/3.0. or for E39 525i/530i, E46 325/330, Z3 2.5/3.0. Applications: 2001 - Feb 2003 525i/530i, 325/330i/Ci, Z3 2.5/3.0 (E39, E46, Z3). Conforti Performance Engine Software represents the most cost-effective approach to increasing engine performance. It has been dyno-tested to provide a safe increase in power by altering fuel enrichment, cam timing and ignition timing specifically for use with premium gasoline. JC Shark Injector OBD-II Performance Engine Software also provides an increase in the factory rev-limit allowing for optimum shift points for maximum acceleration. Not only do we re-map part-throttle fuel and spark, we also re-map other areas of chips other tuners don't touch - such as acceleration enrichment, transition fueling (how the car responds to rapid change in pedal, and VANOS control as needed to optimize the vehicle for operation on premium fuel. This new software for the 2.5 and 3.0 engines is fully octane adaptive. It takes advantage of premium fuels from 91 AKI to 95 AKI and higher. There is no need for separate octane related variants with this software!
Manufacturer: TMS
Not Available
Find Similar
Part #:

Your Price: $367.99
Shipping: *Ship Group Qualified Part - (Ship Group?)
Stock Status: Out of Stock - E-mail me when available
Description: TMS E46 M3, S54 M Coupe/Roadster Shark Injector OBD-II Performance Programmer! Shark Injector OBD-II Performance Programmer! Applications: 2001 - 2005 M3, M Roadster/M Coupe (E46, Z3) 2001-05 M3 Stock: 278.2 rear wheel Horsepower , 235.3 rear wheel Torque Sharked: 284.2 rear wheel Horsepower, 236.9 rear wheel Torque Peak Gain 6.0 rear wheel HP and 1.6 rear wheel Torque (Note: the max gain (biggest improvement) is 9 rear wheel HP between 7000 and 8000 rpm) Choose between 91 and 93 octane Top Speed Limiter Removed Your choice of a stock rev limit or a raised rev limit to 8100 rpm Throttle response improved in both Sport and non-Sport modes New options for making life easier - DSC button controls Sport mode. With this feature you can control how the DSC and Sport mode interact. By pressing the DSC button and turning the system off you will automatically engage Sport mode. And by turning DSC back on, the Sport mode will disengage. This effectively de-activates the Sport button on the console. You'll only have to push one button instead of two! Available with 8100 rpm rev limit only.
Manufacturer: TMS
Not Available
Find Similar
Part #:

Your Price: $297.99
Shipping: $0.00 - FREE Shipping! - & *Ship Group
Stock Status: Out of Stock - E-mail me when available
Description: Conforti Shark Injector for 1996-1999 323/328/M3, E39 528i, 1998-2000 M Coupe/Roadster - 1996 - 2000 6 cylinder single-vanos BMWs, Z3 (E36, E39, Z3, MZ3) TMS / Conforti Performance Engine Software represents the most cost-effective approach to increasing engine performance. It has been dyno-tested to provide a safe increase in power by altering fuel enrichment, cam timing and ignition timing specifically for use with premium gasoline. TMS OBD-II Performance Engine Software also provides an increase in the factory rev-limit allowing for optimum shift points for maximum acceleration. Not only do we re-map part-throttle fuel and spark, we also re-map other areas of chips other tuners don't touch - such as acceleration enrichment, transition fueling (how the car responds to rapid change in pedal, and VANOS control as needed to optimize the vehicle for operation on premium fuel (91+ octane). This will also work on the 1996-99 E36 323i/328i and all single-vanos M Coupe/Roadster models (1998-2000). NOTE 9/24/09 - price change - prices have gone down on this product... a VERY rare thing in the automotive world. Retail has gone down from 369.00, KO price 367.99 to 299.99, and 297.99 respectively.
Manufacturer: TMS
Not Available
Find Similar
Part #:

Your Price: $368.95
Shipping: *Ship Group Qualified Part - (Ship Group?)
Stock Status: Out of Stock - E-mail me when available
Description: BMW Z3 2.8, M Roadster/Coupe Conforti Cold-Air Intake Kit. Part #: JCINTAKEROADSTER. forti Cold-Air Intake Kit. Part #: JCINTAKEROADSTER. Applications: 1997 - 2000 Z3 2.8 97-98, 97-00 M Roadster/Coupe (Z3). This kit simply replaces the very restrictive factory air box with a free flowing, reusable ITG foam air filter and mandrel bent intake tube which provides smooth cool air flow to the engine. Unlike similar styled “cone filter” kits the Conforti intake features a custom molded heat shield. This shield provides protection from the engine's power-robbing hot air and is a perfect fit to your engine bay. The hood acts as the intake’s cover – completely sealing the filter off. Intake air is drawn in from the factory inlet between the radiator and the headlight. Metric hardware and rubber stripping is also included to give the kit a factory installed appearance. A 12-page instruction book with photos makes installation a breeze for weekend mechanics or professionals. No cutting or modifying of stock components is required. There is not a better Cold Air Intake Kit on the market. Why do we use an ITG Foam filter? Because it’s the best-performing and safest low-restriction performance air filter you can buy. With the Shark Injector and this intake, gains were as much as 17 hp / +8 ft-lbs torque at peak (with a big torque gain in the mid-range). Testing has shown these filters to remove all particles above 10 microns in size. The particles between 10 and 20 are most harmful to your engine. Compare this to cotton gauze, which cannot filter below 20 microns. The ITG has a much higher tolerance for dust penetration than other filters on the market, maintaining up to 80% of its flow capacity when dirty. Lower maintenance than other filters, it simply needs to be wiped off or the occasional wash. This kit fits Z3 2.8 single Vanos (97-98) and the 97-00 M Roadster/Coupe. KO NOTE: As of 1/9/12 - per Turner Motorsport our supplier for this particular part, they no longer carry it, and so, neither so we, at this time.
Manufacturer: TMS